Mục lục bài viết
Update: 2021-12-26 06:24:12,Quý quý khách Cần tương hỗ về Why does my máy tính have power but the screen is black?. Bạn trọn vẹn có thể lại Comments ở phía dưới để Ad đc tương hỗ.
|
|
By Jeff Grundy
Related
A máy tính that does not boot is always a source for concern and even panic in some cases. If you are like many people, your máy tính not only serves as a source of entertainment, but also as a repository for important data and documents. Therefore, if your máy tính turns on, but is not able to display anything on the screen, anxiety runs high to say the least. If your máy tính is still under warranty, contact the retailer or manufacturer immediately and ask for assistance. If your laptops warranty has expired, though, use a few simple steps to troubleshoot the notebook and determine whether you can repair the unit yourself.
Tóm lược đại ý quan trọng trong bài
1
Shut down the máy tính and close the LCD screen. Remove the AC power cord and other cables from the máy tính. Flip the máy tính over and remove the battery pack.
2
Use an eraser to clean the metal contacts on the battery and the battery bay. Remove any tarnish or build up that may appear on the contacts. Blow the excess eraser bits from the battery and the battery bay.
3
Reinsert the battery into its bay and reconnect the AC power cord and other cables. Ensure that the cable connections are tight and that you lock the battery in its bay.
4
Power on the máy tính and check to see if you can see an image on the display.
1
Shut down the máy tính, unplug the AC adapter and close the LCD screen. Flip the máy tính over so that it is upside down.
2
Locate the cover for the memory module. On most laptops, the memory slot cover has a small icon picture of a memory stick or label. Remove the screw that holds the cover in place with the Phillips screwdriver.
3
Insert your wrist into the loop of the antistatic wrist strap and clip the other end to a metal surface.
4
Unlock the clips that secure the memory module in its slot. Remove the memory module and reinsert it into the slot. Push the module down until it snaps into place. Replace the memory cover slot and secure with the retaining screw.
5
Locate the hard drive cover and remove the retaining screw. Remove the hard drive and reseat it in its slot. Do the same for the CD/DVD drive of your máy tính.
6
Reconnect the AC adapter to the máy tính. Power on the máy tính and check to see if an image displays on the screen.
1
Shut down the máy tính and disconnect the AC adapter.
2
Connect the monitor cable from a spare external monitor to the VGA or DVI video out port on the rear of the máy tính. Plug the power cord into an available electrical outlet.
3
Power on the máy tính. After the LED lights on the máy tính appear, or you hear the hard drive inside start to spin, press the Fn key combination that sends the display to an external monitor. On most máy tính keyboards, there is a small icon picture of a monitor symbol. Press the Fn key and the key with the monitor symbol a couple of time to see if an image appears on the external monitor. If an image appears on the monitor, the problem is with the LCD screen of the monitor. If no image appears on the monitor, either the video card or motherboard in the máy tính is probably defective.
References
Warnings
Writer Bio
Jeff Grundy has been writing computer-related articles and tutorials since 1995. Since that time, Grundy has written many guides to using various applications that are published on numerous how-to and tutorial sites. Born and raised in South Georgia, Grundy holds a Master of Science degree in mathematics from the Georgia Institute of Technology.
Most Popular
Reply
5
0
Chia sẻ
– Một số Keyword tìm kiếm nhiều : ” Review Why does my máy tính have power but the screen is black? tiên tiến và phát triển nhất , Share Link Tải Why does my máy tính have power but the screen is black? “.
You trọn vẹn có thể để lại Comments nếu gặp yếu tố chưa hiểu nhé.
#máy tính #power #screen #black